Concrete repairs & reinforcement

JURCEM ACRYCURE WB is a ready to use, effective, acrylic, emulsion blend liquid membrane forming, curing and sealing compound for protecting freshly placed concrete against rapid water evaporation.
It also acts as a primer for selected surface coatings thus saving the needs to remove it prior the application of such coatings.
JURCEM ACRYCURE WB is non-yellowing and thus it retains natural concrete colour.

JURCEM ACRYCOAT APCC is a two pack high performance acrylic polymer modified cementitious coating system consisting of Portland Cement, graded silica sand, hydraulic binders and additives to enhance hydrophobic , workability and adhesion properties.
It is recommended as an abrasion, skid and water resistant coating for all-purpose trafficable usages and is suitable for internal and external applications.

JURCEM BONDING AGENT is a modified synthetic latex which is used as an additive for mortar mixes to enhance its bonding to substrates, flexural strength, water resistance, wear resistance and abrasive resistance especially for thin bed applications.
It improves resistance to deterioration caused by chloride penetration through moisture, carbonation and chemical corrosion. JURCEM BONDING AGENT is designed to improve durability.
It can be used neat, straight from the container, or it can also be added to cement or mortar to enhance its properties.

JURCEM NON-SHRINK GROUT GP is a specially formulated, pre-packed and ready to use non-shrink cementitious grout. It is non-corrosive, non-oxidising and is free of chlorides.
It consists of Portland cement, specially selected graded silica sand, mineral accelerator and other high performance additives. It is formulated to compensate dry shrinkage in all phases.
It requires only on-site addition of water to produce a high early compressive strength. It is easy to install and it eliminates site variations.

JURCEM NON-SHRINK GROUT PG is a pre-packed and ready to use, non-shrink, cementitious pumpable grout consisting of Portland cement, specially selected graded silica sand, mineral accelerator and other high performance additives. All additives used are chloride and alkali free.
JURCEM NON-SHRINK GROUT PG is designed for application on general repairs to concrete structure. Repairs such as:
1. for the stabilising of settlement affected non-suspended ground slabs,
2. pressured infilling to cavities and voids between slabs and the immediate ground surfaces; also
3. cracks or spalled areas through pressure or gravity fed grouting.

Other applications include filling of machine bases, crane rails, stanchion bases and anchor bolts & bars.

JURCEM HS GROUT 70 is a pre-packed and ready to use, high strength, non-shrink, cementitious, pumpable grout consisting of Portland cement, graded silica sand, mineral accelerator and other high performance additives. It is formulated to compensate dry shrinkage in all phases. All additives used are chloride and alkali free.
JURCEM HS GROUT 70 is designed for a wide range of high strength and free flow applications to concrete structure. The high flow characteristics can achieve penetration and levelling with no bleed and zero shrinkage when placed with proper water to solid ratio.

JURCEM HS GROUT 85 is a pre-packed and ready to use, enhanced strength, non-shrink, cementitious, pumpable grout consisting of Portland cement, graded silica sand, mineral accelerator and other high performance additives. It is formulated to compensate dry shrinkage in all phases. All additives used are chloride and alkali free.
JURCEM HS GROUT 85 is designed for a wide range of high strength and free flow applications to concrete structure. The high flow characteristics can achieve penetration and levelling with no bleed and zero shrinkage when placed with proper water to solid ratio.

JURCEM SPIRAL GROUT is a pre-packed and ready to use, high strength, non-shrink, cementitious, pumpable grout consisting of Portland cement, graded silica sand, mineral accelerator and other high performance additives. It is formulated to compensate dry shrinkage in all phases. All additives used are chloride and alkali free.
JURCEM SPIRAL GROUT is designed for a wide range of high strength and free flow applications to concrete structure. The high flow characteristics can achieve penetration and levelling with no bleed and zero shrinkage when placed with proper water to solid ratio.

JURCEM REPAIR MORTAR is a two-pack polymer modified cementitious repair mortar. The drymix mortar comprises of Portland cement, oven dried, graded, high quality silica sands, hydraulic binders and chemical additives.
The liquid component is a polymer modified emulsion which is added as a gauging solution to increase adhesion and enhance its mechanical properties.
JURCEM REPAIR MORTAR is recommended for use as a basic repair mortar, in applications to vertical and overhead concrete surfaces, precast concrete, trafficable concrete floors and pavements and as a general purpose structural repair medium.

GEOMIX NON-SHRINK GROUT GP is a specially formulated, pre-packed and ready to use non-shrink cementitious grout. It is non-corrosive, non-oxidising and is free of chlorides.
It consists of Portland cement, specially selected graded silica sand, mineral accelerator and other high performance additives. It is formulated to compensate dry shrinkage in all phases.
It requires only on-site addition of water to produce a high early compressive strength. It is easy to install and it eliminates site variations.

GEOMIX NON-SHRINK GROUT PG is a pre-packed and ready to use, non-shrink, cementitious pumpable grout consisting of Portland cement, specially selected graded silica sand, mineral accelerator and other high performance additives. All additives used are chloride and alkali free.
GEOMIX NON-SHRINK GROUT PG is designed for application on general repairs to concrete structure. Repairs such as:
1. for the stabilising of settlement affected non-suspended ground slabs,
2. pressured infilling to cavities and voids between slabs and the immediate ground surfaces; also
3. cracks or spalled areas through pressure or gravity fed grouting.

Other applications include filling of machine bases, crane rails, stanchion bases and anchor bolts & bars.

GEOMIX HS GROUT 70 is a pre-packed and ready to use, high strength, non-shrink, eco-friendly cementitious, pump able grout consisting of Portland cement, graded silica sand, mineral accelerator and other high performance additives. It is formulated to compensate dry shrinkage in all phases. All additives used are chloride and alkali free.
GEOMIX HS GROUT 70 is designed for a wide range of high strength and free flow applications to concrete structure. The high flow characteristics can achieve penetration and levelling with no bleed and zero shrinkage when placed with proper water to solid ratio.